To Next Page

To Previous Page

Routine Maintenance

•Donotburntonercartridges.Exposuretoanopenamecancausethetonercartridge

to burn or explode, causing serious injury.

• Thefuserunitandtheareaarounditinsidethemachineareextremelyhotwhenoper-

ating. When you clear a paper jam or inspect inside, be careful not to touch around the

fuser unit. It may cause burns.

•Whenyouclearapaperjamorreplacethetonercartridge(ortonerbottle),becareful

not to get the toner powder into your eyes or mouth. If the toner gets in your eyes or

mouth, immediately ﬂush with cold water an d consult a physician.

•Becarefulnottostainyourhandsorclotheswiththetoner.Ifyourhandsorclothes

get stained, wash them immediately with cold water. The stains may become perma-

nent if washed using warm water.

•Donotattemptmachineoperationsthatarenotdescribedinthismanual.

Ventilation

•Alwaysoperatetheproductinwellventilatedareas.

Operating the product in poorly ventilated areas for an extended time period could

pose health risks. Be sure to frequently ventilate the operating area.

•Donotletanyobjectobstructorplugthe ventilationholesofthisproduct.Accumu-

lated heat inside the product could result in a malfunction.

Muratec F-315 User Manual

Other manuals for Muratec F-315