10-6 us e r s e t t I n G s
Copy settings
The copy settings allows you to customize various copy settings to match your needs.
Accessing the copy setting
1
Press <Menu>, <2>, <3>.
[Program] No.23_
3 Copy Settings
2
Press <Enter>.
[Program] No.231
1 Scan Parameters
3
Use <q> or <p> to search the item you want to set or change and press <Enter>.
4
Change settings and press <Enter>. For details of each setting, refer to the following
table:
5
When you have finished, press <Reset> to return to the standby mode.
The underlined settings are factory defaults.
1. Scan Parameters
Doc. Type You can choose one of the following for the default.
Text, Photo&Text, Photo
Contrast You can choose one of the following for the default.
Normal, Dark, Darkest, Light , Lightest
2. Auto Reset Time
The machine returns to its initial condition automatically in a certain
period of time. You can change this time from 1 to 10 minutes.
03 min.
3. Copy Auto
The machine automatically selects the recording paper size according to
the document size and enlargement/reduction rate. You can change it
to select the document size or enlargement/reduction rate automatically,
instead of the recording paper size.
Paper Size The paper will be selected automatically according to the
document size and copy ratio.
Reduction Copy ratio will be set automatically according to the paper
size and document size.
Doc. Size Document size will be set automatically according to the
paper size and copy ratio.
4. Copy Protect Protects when switching to the copy mode (page 9-13).
5. Sort Copy
Default sort copy setting.
On The copies can be assembled as sets in sequential order.
Off The copies will be
printed on a page-by-page basis.
6. Combine Default combine copy setting.
On The machine always performs combine copies.
Off The machine only makes combine copies when set manually.
To Next Page
Loading...
Need help?
General
