9-11se c u r I t y f e a t u r e s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
se c u r I t y f e a t u r e s
Sending a fax using a department code
For this operation to work, make sure:
•Thedepartmentcodeshouldbesetonyourmachine.
•Youknowthedepartmentcode.
1
Place your document on the ADF or document glass.
(See page 2-11 for details.)
2
Adjust the document resolution and contrast.
3
Enter the fax number by either pressing a one-touch key, entering a speed-dial num-
ber or manually dialing it.
4
Press <Start>. (If you pressed a one-touch key, no need to press <Start>.)
Enter Dept. Code
000000000
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1950.
Making a copy using a department code
For this operation to work, make sure:
•Thedepartmentcodeshouldexistonyourmachine
•Youknowthedepartmentcode
1
Place your document on the ADF or document glass and adjust settings.
2
Use the numeric keys to enter the number of copies.
4
Press <Start>.
Enter Dept.Code
000000000
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1950.
To Next Page
Loading...
Need help?
General
