EasyManua.ls Logo

Murr Elektronik CUBE20S PROFINET IO - Replacing Electronic Modules

Murr Elektronik CUBE20S PROFINET IO
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disassembling and replacing modules
User manual 57106_hdb_en_13 35 / 94
7.4 Replacing an electronic module
Disassembly
The electronic module has a locking lever at the bottom.
1 | Power-off your system!
2 | Press the locking lever upwards for disassembly.
3 | To remove the electronic module, pull it out towards the front.
The electronic module has been removed.
Installation
The electronic module has a locking lever at the bottom.
Slide the electronic module with the help of the guide strip into the terminal
module.
The electronic module engages audibly at the bottom.
Now you can bring your system back into operation.
Fig. 7-5: Disassembling and installing the electronic module

Table of Contents

Related product manuals