Murr Elektronik CUBE20S PROFINET IO User Manual

Manual CUBE20S PROFINET IO
Art.-No. 57106 Bus node incl. power module
3 / 94
Table of Contents
1 Introduction 6
1.1 Service and support 6
1.2 Introduction / about this document 7
1.3 Symbols 7
1.4 Trademarks 8
2 For your own safety 9
2.1 Target group 9
2.2 Intended purpose 9
2.3 General safety instructions 9
2.4 Notes on electrostatically sensitive equipment 10
2.5 EMC installation guidelines 11
2.6 Notes on spare parts and accessories 11
2.7 Environmentally friendly disposal 12
2.8 EC Declaration of Conformity 12
2.9 Warranty and liability 12
3 System description 13
3.1 Hardware revision 17
4 General data 18
5 Technical Data 20
6 Mounting 22
6.1 Dimensions 22
6.2 General notes 23
6.2.1 Functional principle of the locking 24
6.3 Installing the DIN rail 25
6.4 Mounting of the bus node 26
6.5 Installing the expansion modules 27
6.6 Replacing an electronic module 28
6.7 Installing the bus cover 29
6.8 Installing the shield bus carrier 30
7 Disassembling and replacing modules 31
7.1 Procedure 31
7.2 Replacing the bus node 32
7.3 Replacing an expansion module 33
7.4 Replacing an electronic module 35
7.5 Replacing a module group 36
8 Installation 38
8.1 General notes 38

Murr Elektronik CUBE20S PROFINET IO Specifications

General

Brand	Murr Elektronik
Model	CUBE20S PROFINET IO
Category	Control Unit
Language	English