For your own safety
User manual 57106_hdb_en_13 11 / 94
2.5 EMC installation guidelines
Industrial use The Cube20S is an electronic device manufactured according to the current
state-of-the-art standards. Both the robust mechanical construction and the
design of the electronic components make it ideal for industrial use.
To guarantee a trouble-free operation, observe the following rules when in-
stalling the device in systems. Otherwise, the high interference immunity and
resistance to damage of the device may become partially ineffective.
The interference immunity of the entire system considerably depends on the
correct installation, location and wiring.
1 | For safe operation, check the installation regulations stipulated by the
manufacturer of the controller.
2 | Bring them in line with the recommendations for an EMC-compatible de-
sign.
3 | Then install Cube20S.
2.6 Notes on spare parts and accessories
Spare parts
Only use the original spare parts or spare parts by other manufacturers ex-
pressly authorized by Murrelektronik GmbH.
Check the function of the device after having replaced a component.
Accessories
The use of accessories may alter the device function. Use only accesso-
ries authorized by Murrelektronik GmbH.
Observe the enclosed instructions of the accessories when installing
them.
To Next Page
Loading...
Need help?
General
