Murr Elektronik IMPACT67 Series - Page 50

Configuration/settings
User manual 55170_hdb_en_13 50 / 145
Device  Parameterization of the module
 Read and write access to the digital IOs.
 Access to the system status
Tab. 8-5: Standard submodules for device
For further information about diagnostic messages in 9.2.1 "General diagnos-
tic messages"
Standard submodules
Parameter/Diagnostic Parameterization of the module
 Diagnostic behavior
 Threshold values for undervoltage
 LED behavior
 Availability of the Murrelektronik IO-Link Tool
 Data layout
 Input delay
Digital IO 2 bytes In
 Value of the inputs as individual bits.
 Layout according to parameter settings (port/pin-
based).
2 bytes Out
 Value for setting the outputs as individual bits.
 Layout according to parameter settings