Element Description
Mode Use the Encoder to select from Guitar, Chords or User mode.
Alternatively, hold the NOTES button and press button 1, 2, or 3 to
select a mode.
SCALE
Root Note Select the root note of the scale.
Type Select the required scale type.
CHORD
Mode Choose between Off (no Chord) or Harm (Harmony).
Type Choose the required Chord type.
For detailed information on selecting Scales in MASCHINE, please refer to
↑7.3.4, Selecting a
Scale and Chords.
7.4 Editing a Pattern
This section explains some of the features available from the MASCHINE JAM hardware that
can be used to edit your Patterns.
These features include:
▪ Quantizing to force note events to stick to the selected Grid. For more information see
↑7.4.2, Quantizing Your Pattern.
▪ Doubling a Pattern in length. For more information see ↑7.4.3, Doubling a Pattern.
▪ Nudging events in the Pattern Editor. For more information see ↑7.4.5, Nudging Events in
a Pattern.
▪ Transposing a Pattern. For more information see ↑7.4.4, Transposing a Pattern.
You can also find detailed information on these features in the MASCHINE Software Manual,
available from the Help menu.
Recording and Editing Patterns
Editing a Pattern
MASCHINE JAM - Manual - 107
To Next Page
Loading...