5. Press the Encoder to confirm the new value.
→ The Swing value is updated. Alternatively, you can use the Smart Strips to adjust Swing
for each Group.
Adding Swing to a Sound
To add Swing to a Sound channel:
1. Press and hold the SWING button, then select a Sound 1-16.
2. Turn the Encoder to select SOUND.
3. Push the Encoder and then turn it to select the Sound swing value.
4. Press and turn the Encoder to adjust the value. Hold SHIFT while you turn the Encoder to
adjust the value in finer increments.
5. Press the Encoder to confirm the new value.
→ The Swing value is updated. Alternatively, you can use the Smart Strips to adjust Swing
for each Sound.
7.2.5 Applying Choke
The Choke All Notes feature allows you to kill any note or event currently playing in your
Project. This affects the audio coming from all Plug-ins.
Choke All Notes is only available on your controller:
►
Press SHIFT + MUTE (CHOKE) to choke all playing notes.
Choke All Notes can be useful in various situations:
▪ As a creative tool in a live performance, e.g. to create stutter beaks.
▪ As a workflow aid, to stop long one-shot Samples that still continue playing after you have
stopped the sequencer.
Recording and Editing Patterns
Playing and Programming Beats
MASCHINE JAM - Manual - 87
To Next Page
Loading...
Need help?
General
Weight and Dimensions
