10.1.6.2 Tuning a Group
Tune mode allows you to tune a whole Group. Simply select a Group, and then slide your finger
across a Smart Strip to adjust the tuning. The LEDs indicate the tuning.
To adjust the tuning of a Group:
1. Press and hold the TUNE button.
2. Press the Group button (A–H) to select the Group you want to adjust. If necessary, use the
D-pad Left or Right buttons to access each bank of eight Groups.
3. Slide your finger across a Smart Strip to adjust the tuning of a Group. Hold SHIFT to ad-
just the value in finer increments.
→ The tuning of the selected Group is adjusted.
Resetting the Tuning of Group
To quickly reset the tuning of a Group:
1. Hold the TUNE button.
⇨ The Group buttons and Sound click-pads become illuminated. The selected Group button
blinks and the on-screen overlay is displayed.
⇨ The Smart Strips now represent Groups A–H.
2. Double tap on the Smart Strip of the Group you want to reset.
→ The Group tuning is reset. You can reset other Groups by switching between banks using
the left and right buttons of the D-pad and double-tapping on each Smart Strips.
Mixing Your Song
Basic Functions
MASCHINE JAM - Manual - 150
To Next Page
Loading...
Need help?
General
Weight and Dimensions
