CHORD mode has one inactive (Off) and two active states, which are described in detail below:
Chord Mode Description
Off CHORD Mode is inactive.
Harm If CHORD Mode is set to Harm, the CHORD
Type menu allows you to specify the interval
of notes in the selected SCALE Type that will
constitute the chord: E.g. a triad in the form
of the root note, the third note, and the fifth
note (CHORD Type value 1-3-5).
Chd Set If CHORD Mode is set to Chd Set, the CHORD
Type menu allows you to choose from a
selection of predefined major and minor
chords depending on the current Root Note.
Chords can be triggered using the twelve
illuminated click-pads in the 8x8 matrix.
7.3.4.4 Chord Type
Use the CHORD parameter Type to define a chord that will be generated from a single note
used as input.
The 8x8 click-pad matrix indicates the keys of a chord being played via white illuminat-
ed LEDs, while inactive click-pads are not fully illuminated.
The available CHORD Type values depend on whether CHORD Mode is set to Harm or Chd Set,
as described in detail below.
Chord Type, Chord Mode Set to Harmonizer
If CHORD Mode is set to Harm, then CHORD Type will offer you a selection of individual notes
present in the selected SCALE Type. This means that for all scales except the 12-tone Chrom
scale, you can select the interval of notes that will make up your chord.
Recording and Editing Patterns
Creating Melodies and Harmonies
MASCHINE JAM - Manual - 97
To Next Page
Loading...
Need help?
General
Weight and Dimensions
