2. Turn the Encoder to select a Grid setting.
3. Press the Encoder.
4. Turn the Encoder to select a new value.
5. Press the Encoder to confirm your selection.
→ A new Grid value is selected.
8.4 Duplicating Scenes
You can copy and paste Scenes in your Project using MASCHINE JAM.
On your controller in the Project view, do the following to copy a Scene and all its contents
from slot to another:
1. Press the SONG button so it is unlit.
⇨ Ideas view is now active and you have an overview of your Scenes (1-8), Patterns, and
Groups (A-H).
2. Press and hold DUPLICATE.
3. Press the Scene button (1–8) you want to copy. If your Project contains more than eight
Scenes, press SHIFT + Scene button (1–8) to access a Scene bank.
Creating Scenes
Duplicating Scenes
MASCHINE JAM - Manual - 129
To Next Page
Loading...
Need help?
General
Weight and Dimensions
