7.4.1 Quick Edit in Step Mode
In Step mode and Piano Roll mode you can quickly adjust the velocity, tuning, and position of
any number of steps in Step Mode via the Quick Edit shortcuts. Simply press LEVEL, TUNE, or
SWING buttons, hold the steps you want to edit and then turn the Encoder to adjust the value.
Adjusting the Velocity
To adjust the velocity of the selected steps:
1. Press STEP.
2. Press LEVEL.
3. Hold the steps on the 8x8 matrix you want to adjust.
4. Turn the Encoder to adjust the value.
→
The velocity of the selected steps are adjusted and the current value is displayed on the
first Smart Strip.
Adjusting the Tuning
1. To adjust the pitch of the selected steps:
2. Press STEP.
3. Press TUNE.
4. Hold the steps on the 8x8 matrix you want to adjust.
5. Turn the Encoder to adjust the value.
→
The tuning of the selected steps are adjusted and the current value is displayed on the
first Smart Strip and the 8x8 matrix.
Adjusting the Position
To finely adjust the position of the selected steps:
1. Press STEP.
2. Press SWING.
Recording and Editing Patterns
Editing a Pattern
MASCHINE JAM - Manual - 108
To Next Page
Loading...
Need help?
General
Weight and Dimensions
