▪ On the Group channel, the Swing settings of a Group affect all Sounds of the Group. The
Group’s swing is added to the Swing set for each individual Sound.
▪ On the Sound channel, the Swing settings of a Sound affect that single Sound.
Adding Swing to the Master
To add Swing to the Master channel:
1. Press and hold the SWING button.
2. Touch the Encoder to show the on-screen overlay.
3. Turn the Encoder to select MASTER.
4. Push the Encoder and then turn it to select a Master swing value.
5. Press the Encoder to confirm the new value.
Adding Swing to a Group
To add Swing to a Group channel:
1. Press and hold the SWING button.
2. To change the Swing of a Group, select a Group button A-H. If your Project contains more
than eight Groups, use the D-pad Left and Right buttons to access other Group banks.
3. Turn the Encoder to select GROUP.
4. Push the Encoder and then turn it to select the Group Swing value. Hold SHIFT while you
turn the Encoder to adjust the value in finer increments.
Recording and Editing Patterns
Playing and Programming Beats
MASCHINE JAM - Manual - 86
To Next Page
Loading...
Need help?
General
Weight and Dimensions
