1. Press the GRP button in the Input/Metering section.
2. Press the Group button (A–H) to select the Group you want to adjust. If necessary, use the
D-pad Left or Right buttons to access each bank of eight Groups.
3. Turn the Encoder to adjust the volume of the Group you selected.
Resetting the Volume Level of a Group
To quickly reset the volume level of a Group:
1. Hold the LEVEL button.
⇨ The Group buttons and Sound click-pads illuminate. The selected Group will blink and
the on-screen overlay will appear.
⇨ The Smart Strips now represent Group A–H.
2. Double tap on the Smart Strip of the Group you want to reset.
Mixing Your Song
Basic Functions
MASCHINE JAM - Manual - 139
To Next Page
Loading...