from the Browser (or create one from scratch), add any Plug-ins, adjust any parameters in that
channel, record Patterns for that Group as you see fit, and when you are ready, insert it back
into your performance!
The Cue bus is also used for following features:
▪ Pre-listening to Samples in the Browser.
▪ Metronome.
▪ Pre-listening functions in the Sample Editor when recording or slicing Samples.
Sending Sound and Group Channels to the Cue Bus
►
In any channel strip, click the little headphones button to send this channel to the Cue
button.
→
The headphones button lights up. The channel is no longer sent to its defined destination
but instead to the Cue bus.
Mixing Your Song
Basic Functions
MASCHINE JAM - Manual - 141
To Next Page
Loading...