2. Press the Group button (A–H) to select the Group you want to adjust.
3. Slide your finger across a Smart Strip to adjust the Aux level of a Group.
→
The Aux level of the selected Group is adjusted.
Adjusting the Aux Level of a Sound
To adjust the Aux level of a Sound:
1. Press the Group button (A–H) to select the Group that contains the Sound you want to
adjust. If necessary, use the D-pad Left or Right buttons to access each bank of eight
Groups.
2. Press and hold the AUX button, then press the click-pad (1–16) to select the Sound you
want to adjust.
3. If you select any click-pad numbered 1–8 the Smart Strip LEDs will reflect the aux level
of Sounds 1–8. If you select any click-pad numbered 9–16 the Smart Strips will represent
the aux level of Sounds 9–16.
Mixing Your Song
Basic Functions
MASCHINE JAM - Manual - 147
To Next Page
Loading...