⇨ This opens the following dialog:
⇨ Click Lock Enabled checkbox from the list.
2. In the submenu that opens, select the Source as Maschine Jam.
3. Select MIDI Note to trigger your Lock snapshots via MIDI notes, Program Change to trig-
ger your Lock snapshots via MIDI Program Change messages, or None (default setting) to
disable MIDI Lock Change completely.
4. If necessary, reopen the same submenu and select the MIDI channel the Lock Changes
should receive MIDI messages from (channel 1 by default).
MIDI Scene change has priority over Lock change. Only Scenes will be triggered by the
corresponding events coming from the MIDI source. Corresponding Lock snapshots will
not be recalled.
Mixing Your Song
Creating Parameter Snapshots using Lock
MASCHINE JAM - Manual - 164
To Next Page
Loading...