→ In this example, the instrument with the selected preset is loaded into the MASCHINE
software and its parameters are automatically mapped to the Smart Strips on your MA-
SCHINE JAM controller, giving you direct hands-on access to the controls on the instru-
ment panel via the CONTROL button.
Resetting a Filter
At any point you can reset a filter within the Browser. This removes all filter settings previously
selected and is a good starting point for a new search.
To reset the Browser:
►
Press SHIFT + D-pad Left button.
→
The Browser will reset so you can create a new filter.
Restoring a Filter
To restore a previous filter:
Using the Browser
Filtering Files in the Browser
MASCHINE JAM - Manual - 62
To Next Page
Loading...