2. Press a button from 1-4 (1/4, 1/8, 1/16 and 1/32 respectively) to select one of the more
commonly used values.
→ The selected value is indicated by the on-screen overlay.
Changing the Grid Using the On-Screen Overlay
The on-screen overlay provides access to all available Step Grid resolutions.
To change the Step Grid’s settings using the on-screen-overlay:
1. Press the GRID button.
2. Turn the Encoder to select STEP.
3. Press the Encoder.
Recording and Editing Patterns
Setting Recording Options
MASCHINE JAM - Manual - 72
To Next Page
Loading...