Native Instruments Maschine MIKRO Getting Started

3. Press the Left/Right Arrow buttons to put the focus on the parameter you want to auto-
mate.
4. Press and hold SHIFT, and turn the Control encoder.
→
Your modulation gets recorded now. On the next loop, the parameter changes will be re-
produced.
There is also another way to record modulation from your controller: the step sequencer.
More on this in ↑7, Creating Beats with the Step Sequencer!
6.3.2 Editing Modulation
We want to quickly mention here that you can also edit any recorded modulation in the soft-
ware. For this, the Control Lane is at your disposal at the bottom of the Pattern Editor:
The Control Lane displays the changes you recorded for each automated parameter.
To edit the modulation:
1. Click the desired parameter in the list of automated parameters (on the left) to select it.
2. Drag the modulation points vertically in the Control Lane.
Applying Effects
Modulating Effect Parameters
MASCHINE MIKRO - Getting Started - 103

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English