Native Instruments Maschine MIKRO Getting Started

7.1 Building Up a Beat in Step Mode
Until now, we recorded all Patterns “live”: We hit the various pads at the desired moments
while the sequencer was playing and the sequencer directly recorded our hits. This is the re-
cording workflow when the controller is in Control mode. On the contrary, in Step mode you pro-
gressively build up the Pattern by programming a sequence for each individual Sound of the
selected Group. Notably, the sequencer does not need to be playing.
7.1.1 Using Step Mode
On your controller, do the following:
1. Press GROUP + pad 13 to select Group A (with the drum kit).
2. Press PATTERN + pad 3 to select the Pattern slot 3 (still empty).
3. Hit the pad with the Sound you want to sequence.
4. Press SHIFT + NOTE REPEAT to enter Step mode.
Each pad now represents one step of a 16-step sequence: you can activate each step by
pressing a pad once, lighting it up. If you press the pad again, the step is removed. This
way it’s quick and easy to create a drum pattern.
5. Press PLAY to start the sequencer.
Now you will hear the sequence and see a light chasing through the pads, starting from
pad 1, going up all four rows from left to right and ending at pad 16. You may continue to
activate or deactivate pads to build your sequence during playback.
6. To switch to another Sound, press SELECT and the pad with the Sound you want to se-
quence.
→
Progressively, you build up a new Pattern.
At any time, you can leave Step mode and get back to Control mode:
►
Press SHIFT + NOTE REPEAT to get back to Control mode.
For now, let’s stay in Step mode — we want to show you a few more things in this mode.
Creating Beats with the Step Sequencer
Building Up a Beat in Step Mode
MASCHINE MIKRO - Getting Started - 106

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English