Native Instruments Maschine MIKRO Getting Started

The pads 9–16 can also be used to solo and mute Groups on the fly when the SOLO or MUTE
buttons are pressed. For example, in order to mute Group C, hold MUTE, press GROUP and
then press the pad 15.
(14) NOTE REPEAT button: Note Repeat is a really handy way to play and record beats — it
plays the selected Sound automatically at a given rate. While holding the NOTE REPEAT but-
ton, hold the pad you want to play: notes will be repeatedly triggered at the selected rate
shown in the display. With buttons F1, F2 and F3, you can select different rates while playing.
You can select new rate values for each of these buttons by turning the Control encoder. Press
SHIFT + NOTE REPEAT to enter Step mode. For more information on Step mode please refer to
chapter ↑7, Creating Beats with the Step Sequencer.
The Note Repeat mode can be pinned: Press NOTE REPEAT + MAIN to pin/unpin the
Note Repeat mode. See ↑10.1.1, Controller Modes and Mode Pinning for more informa-
tion
10.3.1.2 TRANSPORT Section
This section gives an overview of the TRANSPORT section.
1
2
3
4
5
6
7
8
Overview of the TRANSPORT section.
Start, stop and restart playback, activate record and skip bars while playing, simply by pressing
the dedicated buttons in the TRANSPORT section of the controller. Use the SHIFT button to
invoke secondary commands such as the metronome, Count in and Step Forward and Back-
ward.
(1) RESTART button: Press the RESTART button at anytime to restart from the beginning of the
current loop range.
Quick Reference
MASCHINE Hardware Overview
MASCHINE MIKRO - Getting Started - 162

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English