Native Instruments Maschine MIKRO Getting Started

2. Press F3 to select STEP and access the Step Grid’s resolution setting. The resolution is
indicated at the bottom of the display.
3. Turn the Control encoder to adjust the value.
7.3 Save Your Work!
Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as is the next time you
open it.
To save your work in the MASCHINE Software:
►
Press [Ctrl] + [S] ([Cmd] + [S] on Mac OS X) to save your Project.
To save your work using the Controller:
►
Press SHIFT + SAMPLING to save your Project.
7.4 To Sum Up…
In this tutorial, we have learned to:
▪ Switch the controller to Step mode.
▪ Use Step mode to record Patterns.
▪ Record modulation in Step mode.
▪ Adjust the Step Grid resolution.
Creating Beats with the Step Sequencer
Save Your Work!
MASCHINE MIKRO - Getting Started - 110

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English