Native Instruments Maschine MIKRO Getting Started

If you decided to create a pattern more than one bar long, you can use the left and right
arrow to switch between each bar or alternatively press F1 FOLLOW and MASCHINE will
automatically follow the pattern and display the steps on the pads accordingly.
7.1.2 Adjusting the Pattern Length in Step Mode
At any time, you can adjust the Pattern Length directly from the Step mode:
At any time, you can adjust the Pattern Length just like in Control mode (see Adjusting the
Pattern Length):
►
Hold PATTERN and turn the Control encoder to adjust the Pattern Length.
Only 16 steps will be represented on your pads, so if you want to program longer Patterns, you
will have to switch to the previous/next 16 steps:
►
Press the Left/Right Arrow button to switch to the previous/next 16 steps of the Pattern or
alternatively, press F1 FOLLOW and MASCHINE will automatically follow the pattern and
display the next 16 steps of the pattern on the pads as the sequence plays.
In Step mode, the bar at the bottom of the display always indicates which part of the Pattern is
currently represented on your pads:
The 16 pads representing the full Pattern (left) or only half of it (right).
Creating Beats with the Step Sequencer
Building Up a Beat in Step Mode
MASCHINE MIKRO - Getting Started - 107

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English