Native Instruments Maschine MIKRO Getting Started

To adjust any parameter from your controller, do the following:
1. Use the Left/Right Arrow buttons to select a parameter.
2. Turn the Control encoder to adjust the parameter value.
Example
As an example, let’s adjust the amplification level of the second oscillator in our “Analovue”
preset. Do the following:
1. Hold the NAV button and press the Right Arrow button repeatedly to select OSC2.
2. Press Left/Right Arrow buttons to select 4/8: OSC2AMP (i.e., “Amplification parameter of
Oscillator 2”, which is the fourth parameter in that page).
3. Turn the Control encoder to adjust the value of the Amplification parameter.
You can fine-adjust the parameter value by pressing and turning the Control encoder!
5.6 Save Your Work!
Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as is the next time you
open it.
To save your work in the MASCHINE Software:
►
Press [Ctrl] + [S] ([Cmd] + [S] on Mac OS X) to save your Project.
To save your work using the Controller:
►
Press SHIFT + SAMPLING to save your Project.
5.7 To Sum Up…
In this tutorial, we have learned to:
Adding a Bass Line
Save Your Work!
MASCHINE MIKRO - Getting Started - 88

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English