Native Instruments Maschine MIKRO Getting Started

Adjusting Volume
1. Press the MAIN button to activate it (the button lights up).
2. Press F1 to select VOLUME.
►
To adjust the overall volume, simply turn the Control encoder. Press and turn the Control
encoder to adjust the value in finer increments.
►
To adjust the volume of a particular Group, press and hold the GROUP button, press the
pad corresponding to the desired Group (the pad must be lit, here the pad 1 for our drum
kit), and turn the Control encoder while holding GROUP. Press and turn the Control en-
coder to adjust the value in finer increments.
►
To adjust the volume of an individual Sound, press and hold its pad, and turn the Control
encoder. Press and turn the Control encoder to adjust the value in finer increments.
At any time, the display indicates the volume’s current value.
We recommend you try this while your Pattern is playing, you will immediately hear the
effect of your changes!
Adjusting Swing
Let’s adjust the overall swing of our Project, too. The Swing feature shifts some of the played
notes, hereby adding some “groove” to your Pattern. The procedure is similar to the one descri-
bed above for the volume:
1. Press the MAIN button to activate it (the button lights up).
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE MIKRO - Getting Started - 51

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English