Nicolet Systems
9-6 April 27, 2015
SSID
This section displays the Service Set Identifier.
Sampling Frequency
The Sampling Frequency section displays the default sampling frequency of the
amplifier. This is the sampling frequency that is used for the first study when it is
started from the amplifier without connecting to the Nicolet brand system. If the
amplifier is connected to the Nicolet brand system and a study is started from the
software, the sampling rate selected becomes the new default sampling rate until the
amplifier is power cycled.
NOTE: When entering your WEP encryption key in the configuration utility, ensure
that it is either 10 or 26 characters and that all of the characters are hexadecimal (i.e.,
either a digit 0-9 or a letter A, D, C, D, E, or F).
To Next Page
Loading...
Need help?
General
