NCE Power Pro - Programming on the Main; Address Programming (Option 1); What to Program

39
OLD STYLE CONSISTS
SETUP AN OLD STYLE CONSIST
CONSIST 2:00PMCONSIST 2:00PM
CONSIST 2:00PMCONSIST 2:00PM
CONSIST 2:00PM
ENTER=ADV 1=OLDENTER=ADV 1=OLD
ENTER=ADV 1=OLDENTER=ADV 1=OLD
ENTER=ADV 1=OLD
Press SETUP. This screen allows you to choose the type of consist to be created. For
those consists that will contain any basic decoders, press 1. Please note that the limit on
an old style consist is four locomotives or advanced consists. NOTE: Once you setup an
old style consist you will not be able to select a new locomotive to run unless you store
the consist away by pressing recall (or clear the consist). Each cab may have up to 6 old
style consists in recall.
INITIAL SCREEN DISPLAYED
CON: 000 2:00PMCON: 000 2:00PM
CON: 000 2:00PMCON: 000 2:00PM
CON: 000 2:00PM
000 000 000 000 000 000
000 000 000 000 000 000
000 000 000
This screen is displayed to show all 4 “slots” for loco’s in the consist are empty. Press the
ENTER key to continue.
ENTERING THE LEAD LOCO NUMBER
CON: 000 2:00PMCON: 000 2:00PM
CON: 000 2:00PMCON: 000 2:00PM
CON: 000 2:00PM
ADD LOCO: _ADD LOCO: _
ADD LOCO: _ADD LOCO: _
ADD LOCO: _
Enter the loco number followed by the ENTER key. The first loco to be added will be the
lead loco (the lead loco number will be displayed on the screen during normal operation).
The consist will respond to this number.
ENTERING THE LOCO DIRECTION
SETUP 2:00PMSETUP 2:00PM
SETUP 2:00PMSETUP 2:00PM
SETUP 2:00PM
DIR THIS LOCO: FDIR THIS LOCO: F
DIR THIS LOCO: FDIR THIS LOCO: F
DIR THIS LOCO: F
The locomotive direction is assumed to be forward, if it is to operate in reverse press the
DIRECTION key. This informs the command station if the loco is in the line-up facing
forward or reverse. This affects only the direction of the loco, not lighting. Press the
ENTER key to continue.
The operator needs to press ADD for every loco to be added. This operation leaves the
consist as the active unit for this Cab. By pressing RECALL the operator can change to
another loco/consist but the old style consist will stay with this Cab until it is either
passed by assigning it to another Cab or is cleared.
OLD STYLE CONSIST FULL
CON: 012 2:00PMCON: 012 2:00PM
CON: 012 2:00PMCON: 012 2:00PM
CON: 012 2:00PM
CAN NOT ADD LOCOCAN NOT ADD LOCO
CAN NOT ADD LOCOCAN NOT ADD LOCO
CAN NOT ADD LOCO
The consist contains four loco’s which is the maximum amount that we support in this
style of consist. Press the ENTER key to continue.