41
DEL LOCO 2:00PMDEL LOCO 2:00PM
DEL LOCO 2:00PMDEL LOCO 2:00PM
DEL LOCO 2:00PM
ENTER LOCO: _ENTER LOCO: _
ENTER LOCO: _ENTER LOCO: _
ENTER LOCO: _
This will drop the intended locomotive from old style consist. Enter the loco number and
the press ENTER.
ERROR MESSAGE
DEL LOCO 2:00PMDEL LOCO 2:00PM
DEL LOCO 2:00PMDEL LOCO 2:00PM
DEL LOCO 2:00PM
NOT IN CONSIST:NOT IN CONSIST:
NOT IN CONSIST:NOT IN CONSIST:
NOT IN CONSIST:
This message will display when the loco selected is not in the active consist.
CLEARING AN OLD STYLE CONSIST
CON:12 2:00PMCON:12 2:00PM
CON:12 2:00PMCON:12 2:00PM
CON:12 2:00PM
024 056 078 024 056 078
024 056 078 024 056 078
024 056 078
Press CLEAR. You can only clear an old style consist if it is the active consist on your
cab. If the consist is not active press RECALL until you have the consist active or
acquire the consist from another cab by “ASSIGN LOCO TO CAB”.
CONFIRM THAT THE CONSIST IS TO BE KILLED
KILL? 02:00PMKILL? 02:00PM
KILL? 02:00PMKILL? 02:00PM
KILL? 02:00PM
ENTER=NO 1=YES:ENTER=NO 1=YES:
ENTER=NO 1=YES:ENTER=NO 1=YES:
ENTER=NO 1=YES:
Press 1 to clear the consist from the Command Station memory. All locomotives that were
in the consist may now be selected and operated independently.
To Next Page
Loading...
