42
CONTROLLING TURNOUTS AND
OTHER ACCESSORIES
ENTER THE ACCESSORY NUMBER TO BE OPERATED
CONTROL 02:00PMCONTROL 02:00PM
CONTROL 02:00PMCONTROL 02:00PM
CONTROL 02:00PM
ACC NUMBER: _ACC NUMBER: _
ACC NUMBER: _ACC NUMBER: _
ACC NUMBER: _
Press SELECT ACCY key. Enter the address of the accessory to be operated. Followed
by pressing the ENTER key. Valid accessory addresses range from 1 to 2044. The
number 2044 is the “Broadcast” address for accessories.
TURN ACCESSORY ON OR OFF
ACC: 003 02:00PMACC: 003 02:00PM
ACC: 003 02:00PMACC: 003 02:00PM
ACC: 003 02:00PM
1=N 2=R NOW=NORM1=N 2=R NOW=NORM
1=N 2=R NOW=NORM1=N 2=R NOW=NORM
1=N 2=R NOW=NORM
Press 1 to turn accessory ON. (Switch machine set to Normal)
Press 2 to turn accessory OFF. (Switch machine set to Reverse)
NOW= NORM or REV - The command station keeps a database of the last accessory
(turnout) commands sent for all accessory addresses. The bottom line of SELECT ACCY
prompt on the Pro Cab LCD reflects the current status of the accessory.
A convenience feature has been added. Pressing SEL ACCY twice at the SEL ACCY
prompt will toggle (reverse) the position of the current accessory.
To Next Page
Loading...
