NDC BenchMike Pro - Page 129

BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Remote Setup 6-21
SYST.LIBRARY.INIT
Initialize the current library. Example:
SYST.LIBRARY.INIT
SYST.LIBRARY. LIST-
NAMES
Request a list of names for all libraries which are
not empty. Example:
SYST.LIBRARY.LISTNAMES
SYST.LIBRARY.NAME
Define a name for the currently selected library.
Example:
SYST.LIBRARY.NAME:NEW PRODUCT
SYST.LIBRARY.PRINT
Print the currently active library. Use
CONF.REPORT.OUTPUT to change or view the des-
tination of the printout. Example:
SYST.LIBRARY.PRINT
SYST.LIBRARY.SAVE
Save the currently active library settings. Example:
SYST.LIBRARY.SAVE
SYST.LIBRARY.SAVEAS
Save the current settings to a new library (“Save
As”). Specify the library number and the library
name. Example:
SYST.LIBRARY.SAVEAS:5 PRODUCT#5
SYST.LIBRARY.SEL
Request or specify the currently active library num-
ber. Ex.:
SYST.LIBRARY.SEL:6
SYST.LIBRARY.SETTINGS
Request the current user library to be sent back as
a response. This data can be saved to a file and
sent back to the BenchMike Pro. This does not
change the user master values stored in the
BenchMike Pro when sent to
the BenchMike Pro. See also SYST.LIBRARY.USER.
Example:
SYST.LIBRARY.SETTINGS?
SYST.LIBRARY.USER
Request the current user library to be sent back as
a response. This data can be saved to a file and
sent back to the BenchMike Pro. All library settings
will be restored including user mastering. See also
SYST.LIBRARY.SETTINGS. Example:
SYST.LIBRARY.USER?
SYST.SKILL
Request PURL version. Example:
SYST.SKILL?
SYST.STAT.SCAN
This command will return the status of the laser
gauge. There are five characters to indicate the
status.
E Extra segments