6-22 BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Remote Setup
M Missing part
L Low power
O Scan overrun
N No scan
If the condition exists, a character will be returned
in that location. If the condition does not exist, the
character will be blank (character space). Example:
SYST.STAT.SCAN?
This command will return the current measurement
status. There are seven characters.
S Scan error
E End of part
M Measuring now
R Upper reject reached
R Lower reject reached
W Upper warning reached
W Lower warning reached
If the condition exists, a character will be returned
in that location. If the condition does not exist, the
character will be blank (character space). Example:
SYST.STAT.MEAS?
Request the application firmware version. Example:
SYST.VER?
To Next Page
Loading...
