4-60
When you click [ ], the icon for editing information, in this window, the Alert Mail Configuration window as shown below
appears. The Alert Mail Configuration window has four tabs.
1
You can choose to enable or disable alert mail functions. If you select this check box, you can make mail-related settings.
2
Specify an alert level from six levels.
Alert levels are categorized according to severity of event causing an alert.
3
You can send a test mail by clicking the button in this box.
IMPORTANT: If you want to send a test mail, complete all alert mail settings detailed in the
following pages.
Note that entering information in the Alert Mail Configuration window does not complete settings.
When you have entered all the information you need to enter, click [OK], and the information will
be written into BMC and settings will be completed.
NOTE: According to severity of event causing an alert, X-Priority: field in the alert mail header
changes as below.
Non-recoverable/Critical X-Priority: 1
Non-critical X-Priority: 3
OK/Information/Monitoring X-Priority: 5
3
2
1
To Next Page
Loading...
