2-27
SLEEP Switch
T save almost all power of the server (power-saving mode or sleep mode). he SLEEP switch allows you to
NOTE: To use the SLEEP switch, an operating system supporting the sleep feature is required.
(Available for Windows 2000 and Windows 2003)
POWER/SLEEP lamp
SLEEP switch
Press the SLEEP switch on the front of the server to place th (The POWER/SLEEP lamp
blinks.) In the power-saving mode, the server retains the memory us operations.
To resume the original state, press the POWER switch. (It may take nal state.)
e server in the power-saving mode.
data and the status of the previo
a little time to resume the origi
NOTE: The operational level in the power-saving mode depends on the operating system in use.
(Available for Windows 2000 and Windows 2003.)
IMPORTANT: Do not change system configuration while turning into the power-saving mode or
in the ng mode. Otherwise, you may fail to resume the original state. power-savi
To Next Page
Loading...
