E-9
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing SCSI Controller Driver (SCSI U160 PCI-ATX-64b)
If you use SCSI controller driver (SCSI U160 PCI-ATX-64b), update your system with EXPRESSBUILDER CD-ROM
attached to your system.
The SCSI controller driver will be installed automatically.
Installing Disk Array Controller Driver (SecuRAID 321)
To additionally install the SecuRAID 321 in a system containing Windows Server™ 2003, connect the controller and take the
following steps to install the driver:
1. When the [Found New Hardware Wizard] dialog box appears, click [Next].
2. When the [Install Hardware Device Drivers] dialog box appears, select [Search for a suitable driver for my device
(Recommended)], and click [Next].
3. When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert "Windows Server™ 2003
OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, and click [Next].
4. When the [Driver Files Search Results] dialog box appears, click [Next].
5. Copying of the driver is completed, and the [Completion of the new hardware detection wizard] dialog box below
appears. Click [Complete].
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.
To Next Page
Loading...
