9-48
Processor Board
T r, remove the processor board.
R val
R ssor board as described in the following procedure.
ricity. Make sure to
o install or remove the processo
emo
emove the proce
IMPORTANT: The processor board is extremely sensitive to static elect
touch the metal frame of the server to discharge static electricity from your body before handling
the processor board. Do not touch the processor board terminals or on-board parts by a bare hand
or pl
Mea
ace the processor board directly on the desk. For static notes, see the section "Anti-static
sures" described earlier.
1. See the s
2. Unlock t remove the front bezel.
3. Remove the memory board cover.
4. m
ection "Preparing for Installation and Removal" described earlier to prepare.
he front bezel with the security key, and
Re ove the two screws and then remove the processor board cover.
5. Remove the two screws securing the ejector.
6. Unlock the processor board and open the ejector.
To Next Page
Loading...
