8-42
COLLECTING EVENT LOG
This section describes on how to collect the log of various events that occurred on the server.
IMPORTANT: If STOP error, system error, or stall occurred, follow the procedure below after
restarting the system.
NOTE: The different revision processor may be mixed in additional CPU kit. When Windows
2000 is used, following message may be appeared in the System Log of the Event Viewer after
extension the different revision of two or more processors in the Express server. If this message is
logged, it is no problem for operation.
1. Click [Management Tool] → [Event Viewer] from the Control Panel.
2. Select the type of the log to collect.
On [Application Log], the events related to the running application are archived. On [Security Log], the events
related to the security are archived. On [System Log], the events occurred at the item which configures Windows
2000 system is archived.
3. Click [Save as...] in the [Run] menu.
4. Input the file name of archived log in the [File Name] box.
5. Select the type of the log file you want to save in the [File Type] list box and click [OK].
For more information, refer to Windows 2000 Online Help.
COLLECT CONFIGURATION INFORMATION
This section describes on how to collect the information on hardware configuration and inside specification.
In order to collect information, "Diagnostic Program" is used.
IMPORTANT: If STOP error, system error, or stall occurred, follow the procedure below after
restarting the system.
1. Point to [Settings] in Start menu, and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Management Tool], and double-click [Computer Management].
The [Computer Management] dialog box appears.
3. Click [System Tool] → [System Information].
4. Click [Save as System Information File] in the [Operation] menu.
To Next Page
Loading...
