6-16
used Terminal Server, Terminal Server Emulator, WBT.
Start Power Console Plus of management PC, after the Power On machine that installed "Server" and "Management
Server".
Install the following component in this PC:
– MegaRAID Client
Management server:
Machine that manages all servers that are monitored and controlled by management PCs
Install the following components in one of the servers or management PCs:
– MegaRAID Server
– MegaRAID Registration Server
Server Setup
Operating Environment
This section explains the operating environment required for Power Console Plus to operate on a server.
Hardware
– Memory:
Size large enough for operating system operation + 10 MB or more
– Free space on the hard disk:
10 MB or more
– Display unit:
Screen size 1024 × 768 or larger
– Required peripheral equipment:
Network Interface card
CD-ROM unit
Pointing device such as a mouse
Management PC Setup
This section explains Power Console Plus setup in a computer that manages servers via the network (TCP/IP).
Operating Environment
This section explains the operating environment required for Power Console Plus to operate on a management PC.
Hardware
– Machine:
This server
PC/AT-compatible machine (which contains Intel® Pentium® or a processor at least equivalent to it)
– Memory: Size large enough for operating system operation + 10 MB or more
– Free space on the hard disk: 10 MB or more
– Display unit: Screen size 1024 × 768 or larger
– Required peripheral equipment: Network Interface card, CD-ROM unit, Pointing device such as a mouse
To Next Page
Loading...
