2-5
Front View (with Front Bezel Removed)
See Chapter 8 for detail information on lamp indication.
1-2
2-4 2-2 2-0
1-3
1-1
2-3 2-1
1
1 CD-ROM drive
The CD-ROM drive reads
1-1: Access lamp (lit orange during accessing)
1-2: CD tray eject button
1-3: Emergency hole
3.5 /3.5-inch device bay
e slots. A hard disk drive of 1-inch high can be installed in this slot. The number following the
bol ch bay (dedicated BTO option), slots 2-3 and
2-4
3 Dis
The disk installed in the server is accessed. If a hard disk is defected, the lamp is lit amber.
Du the lamp is lit green or amber alternately. (This occurs only in the disk array configuration.)
4 ro
p
4-1
5 Me
Up .
-1
5-2
5-3
-4
-5
6 Ad
The bold-faced character indicates the slot number.
hall be installed in the slot #2, #3, and then #4 in the order.
data from the inserted CD-ROM.
2 -inch hard disk bay
ditional hard disk driv
Ad
d-faced number indicates SCSI ID. When additional HDD cage with 3.5-in
are used for 3.5-inch device bay.
k lamp (green/amber)
ard
disk lamp is lit green if a h
ring the rebuild processing,
P
U
cessor board
to four processors can be connected to this board.
Board ejector
mory board
to four DIMMs can be connected to this board
5 Board ejector
POWER lamp
Attention lamp
5
5
Redundancy lamp
Attention switch
ditional memory board slot
number following the
d s
Additional memory boar
4
3 3 3
5
5-1 5-2
5-4 5-5
4-1
6-3
5-3
6-4 6-2
To Next Page
Loading...
