4-69
No Error Message What to do
2
Failed to acquire BMC
Configuration:
Check the network environment and try again.
Contact your service representative if the error persists.
3
Used by other software program.
Try again after a while.
Try again after a while.
4 Invalid BMC configuration file. The BMC configuration file may be corrupted. Check the file.
5
The required XML tag is not
found.
The BMC configuration file may be corrupted. Check the file.
6 Failed to write the file.
The BMC configuration file is not saved successfully. Change the location to
save the file and try again.
7 Invalid user name
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a user name. A user name should be 32 characters or less.
8 The user name is too long A user name should be 32 characters or less.
9 The password is too long. Use 16 or less characters.
10 Passwords are not matched. Again, input passwords.
11 Invalid HTTP port number You can use only numeric values.
12 Invalid SSL port number You can use only numeric values.
13
HTTP/SSL should not be the
same.
The same port number can't do them. Specify different value.
14 Invalid login attempt period You can use only numeric values.
15 Invalid failed login attempts You can use only numeric values.
16 Invalid account lock period You can use only numeric values.
17 Invalid IP address Use numerals and periods to specify an IP address.
18 Invalid subnet mask Use numerals and periods to specify a subnet mask.
19 Invalid default gateway Use numerals and periods to specify a default gateway.
20 Invalid DNS server IP address Use numerals and periods to specify the IP address of DNS server.
21 Invalid host name
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a host name. A host name should be 64 characters or less.
22 Invalid domain name
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a domain name. A domain name should be up to 256 characters.
23
The SMTP server address is too
long.
Specify within 256 characters.
24 Invalid SMTP port number. You can use only numeric values.
25 Invalid retry count You can use only numeric values.
26 Invalid retry interval You can use only numeric values.
27 "To" is too long. Specify within 256 characters.
28 "From" is too long. Specify within 256 characters.
29 "Subject" is too long.
Specify within 512 characters. If you use Japanese characters, the number of
characters you can use is less than half of 512 characters.
30 The message is too long.
The message should be up to 4064 characters. If you use Japanese
characters, the number of characters you can use is less than half of 4064
characters.
31 Failed to open the file: The specified file may not exist. Check the file name.
32 Failed to close the file: The specified file may be corrupted.
33 Can’t open the file: The specified file may not exist. Check the file name.
34 Timeout has occurred.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
To Next Page
Loading...
