7-4
4. Wipe the tray with a dry soft cloth.
IMPORTANT: Do not wipe the lens of the CD-ROM drive. Doing so may damage the lens and
may cause a malfunction of the drive.
5. Press the Eject button or gently push on the tray front to close the tray.
6. Wipe the signal side of the CD-ROM with a dry soft cloth.
IMPORTANT: Wipe CD-ROMs from the centre to the outside. Use only CD-ROM cleaner if
necessary. Cleaning a CD-ROM with record spray/cleaner, benzene, or thinner causes damage to
the CD-ROM contents. At worst, inserting the CD-ROM into the server may cause failure.
OK
NG
To Next Page
Loading...
