9-16
Removal
R evice in the following procedure.
f the power.
2. e
3.
4.
m
emove the 3.5-inch d
1. Shutdown the system and press the POWER switch to turn of
Se the section "Preparing for Installation and Removal" described earlier to prepare.
Unlock the front bezel with the security key, and remove the front bezel.
Re ove a screw and pull the device with tray out from the 3.5-inch device bay.
5. Disconnect the SCSI cable and power cable f hem. rom the device, and attach the connector covers to t
6. Remove the device from the additional tray.
To Next Page
Loading...
