3-18
NOTE: Make sure of the cable you are going to connect. The ICMB connector and the front
serial port B connector of this server have the same shape as the LAN connector. Be careful not to
connect a cable to a wrong connector.
Keyboard
Mouse
Display unit
10BASE-T
Device with USB
interface (USB2.0)
(e.g., terminal
adapter)
Printer with the
Network system on LAN
(connected via a hub for
Hub (multiport repeater)
1000BASE-T / 100BASE-TX /
parallel interface
Device with the serial interface
(e.g., modem)
Direct connection to the leased
line is prohibited.
evice with USB
SB1.1) interface
., keyboard)
Hub
(multiport repeater)
100BASE-TX /
10BASE-T
cord to the receptacle.
when an optional
Device with the serial interface
(e.g., modem/management PC)
Direct connection to the leased
line is prohibited.
Device with
ICMB interface
D
(U
(e.g
Finally connect the provided
power
Use this inlet only
If connecting the server to UPS,
see the explanation below.
power supply unit is
additionally installed.
To Next Page
Loading...
