NEC NC1600C - Version Check (Interface, Processor, FFIB)

“Confidential, Do Not Duplicate without written authorization from NEC.”
6-3
METHOD OF FIRMWARE UPGRADING
4. Version check (Interface, Processor, FFIB)
1) Start “DLP Cinema® Firmware Installation Program” from the PC for login.
(Refer to 10-2. DLP Cinema® Firmware Installation Program.)
2) Press and select “Release *.*.dlpcinema”.
Compare the release version of “Current Projector Info” with that of “Selected Release” and write the
obtained data on the list (to be specified separately).
If there is any discrepancy in versions of “Current Projector Info” and “Selected Release,” update the
discrepancy items according to the instructions specified below.
Discrepancy in all versions of Interface Board and Processor Board, and FFIB
→ Item 5.
Discrepancy in Interface Board and Processor Board only
→ Item 6.
Discrepancy in FFIB only
→ Item 7.
Select Release Installation