“Confidential, Do Not Duplicate without written authorization from NEC.”
6-4
METHOD OF FIRMWARE UPGRADING
3) Press .
A differential file from the latest version is automatically updated.
4) A pop-up window requiring login is displayed in the middle of updating. Press .
5. Update (Interface, Processor, & FFIB)
1) Start “DLP Cinema® Firmware Installation Program” from the PC for login.
(Refer to 10-2. DLP Cinema® Firmware Installation Program.)
2) Press and select “Release *.*.dlpcinema” from the folder where the
firmware is stored.
OK
OK
5) Input ID and password specified below, and press the button.
ID : Service
Password : Heal Thyself ( : for Blank)
6) END upon the display of “Complete”
7) After the completion of updating, check all versions again.
To Next Page
Loading...
Need help?
General
