NEC NC1600C - Description of the Touch Panel Sections

3
1. What’s in the Box? and the Names of the Projector Parts
1-2. Description of the Touch Panel Sections
1-2-1. Front Section of the touch panel NC-TP6402
LCD panel
A touch panel screen.
1-2-2. Rear Section of the touch panel NC-TP6402 (down ward)
USB port (Type A)
This is not used with this controller.
LAN port (RJ-45)
Use a LAN cable (Ethernet cable) to connect
the controller with the projector.
External control terminal
(RS-232C/422/485)
This is not used with this controller.
External control terminal
(RS-232C)
This is not used with this
controller.
DC IN terminal (DC power input)
A power terminal. Ask the service
personnel to connect the power cable.
Power ON/OFF switch
The main power switch of this controller.
The power of the controller is linked with
the power for the projector.
Use while the power is always ON.
VGA port
This is not used with this controller.
PS/2 keyboard/mouse port
This is not used with this controller.
Reset button
This is not used with this controller.