NEC NC1600C - Digital Cinema Communicator

“Confidential, Do Not Duplicate without written authorization from NEC.”
6-13
METHOD OF FIRMWARE UPGRADING
10-4. Digital Cinema Communicator
Preliminary arrangements (Not required if setting is already finished in the PC)
• Make settings for the PC network to the figures specified below.
IP-Address 192. 168. 010. 17
Gateway 192. 168. 010. 17
Subnet Mask 255. 255. 255. 0
1) Start DigitalCinemaCommXP.exe.
2) Communication setup
Select Communication Settings of .
S
etu
p
Enter the IP address of “192. 168. 10. 10” and press .
O
K