“Confidential, Do Not Duplicate without written authorization from NEC.”
6-12
METHOD OF FIRMWARE UPGRADING
2) Setting for the projector being connected
Enter the IP address of 192. 168. 10. 11.
3) Select the connecting port.
Select the “External Ethernet port.”
(When connection is successful, “Log In” is displayed in “Version Info”.)
4) Security setup
Enter the User ID and Password in the Security item and press .
ID : Service
Password : Heal Thyself ( : for Blank)
When Log In is successful, the version information specified below is displayed in “Version Info”.
Login
To Next Page
Loading...
