NEC NC1600C - 1 Whats in the Box? and the Names of the Projector Parts; Whats in the Box

2
1-1. What’s in the Box?
Check the accessory contents as follows:
• Touch Panel and Controller (This Device)
• User’s Manual (This document)
TIP
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
• The LAN cable and AC power cable, etc. are accessories to the holder arm (optional). Should any of the
items delivered to you in the package be missing or damaged, please contact your dealer/distributor (from
whom you have purchased your projector) immediately with the information.
• Use a holder arm (optional) that your projector supports. The following are supported holder arm model names.
Supported holder arm model name
NC-TH6401
NC-TH6402
NC-TH6403
Supported touch panel model name
NC-TP6401
NC-TP6402 (Supports RoHS)
NC-TP6402 (Supports RoHS)
Your projector
NC2500/NC1500 series
NC800 series
• The following outlines accessories of the holder arm (optional).
Accessory
• Holder arm (For NC-TH6401)
• LAN cable • DC power cable • Mounting screws (4 pcs.)
• Holder arm (For NC-TH6402)
• LAN cable • DC power cable • Mounting screws (4 pcs.)
• Holder arm (For NC-TH6403)
• LAN cable • AC power cable • Mounting screws (4 pcs.)
• AC power adapter • AC adapter mounting screws
Holder arm model name
NC-TH6401
NC-TH6402
NC-TH6403
• The following outlines the power cords described in this document.
• If using the NC2500/NC1500 projector series: DC power cord packaged with the holder arm
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
• If using the NC800 projector series: AC power adapter and AC power cord packaged with the holder arm
1.
What’s in the Box? and
the Names of the
Projector Parts